Byme-D


Flight Controller of Delta Wing Stability Improved

Multiple models                      Three flight modes                               Easily master                      SBUS&PPM supported                           Compact size


Multiple Models


Applicable to all model airplanes with mix elevator/aileron controls including delta wing, paper plane, SU27, F22.

From Beginner to Master


With the three-axis gyroscope and three-axis acceleration sensor and the full attitude algorithm, control algorithm and digital filter combined, Byme-D makes it easy to change from Modes of Stabilize Mode/Gyro Mode/Manual Mode.

Beginners can start with the Stabilize Mode and quickly master even at first flight.

Stabilize Mode


Unlilke fully manual,this mode has flight controller assisting to balance arcraft and is suitable for beginners to practice level flight

ROLL

PITCH

Gyro Mode


Under this mode, the three-axis gyro assists to enhance the flight stability but the aircraft won’t level automatically. Pilots with certain experience take the Rate Mode to practice better control of fixed wing.

Manual Mode


Under this mode, the three-axis gyro assists to enhance the flight stability but the aircraft won’t level automatically. Pilots with certain experience take the Rate Mode to practice better control of fixed wing.

No Need of Parameters Setting, Easy Setup


Byme-D is developed with the best PID parameters by experienced pilots and engineers repeatedly studied flight tests for over a year. Pilots only need to pull both joysticks to outside corners to calibrate without specially setting parameters.

Receiver with SBUS or PPM signal output

CH4:Null

CH3: Throttle (Powered by ESC BEC)

CH4:Null

CH1: Servo at Left

CH1: Servo at Left

Button: Servo phase adjustment

Aircraft Head

Compact and Portable, Enjoy Indoor/Outdoor Flight


Byme-D is tiny with the total weight of 4.5g including wires. Even small indoor models can have it installed without extra burden for longer flight time.

Package List for Byme-D

  • Byme-D*1

  • Byme-D connect to receiver*1

  • Double-sided adhesive tape*1

  • Packing bag*1